Ambulatory Blood Pressure Monitor Cuffs

TM Series Cuffs suit TM-2440, TM-2441 and TM-2430.

$TM Cuffs

Additional Information

Cleaning and Disinfection Recommendations for TM-2657P, TM-2440, TM-2441, UM-211 UA-Series and Cuffs

Cleaning the Main Body and Cuff

To clean the main body and the cuff cover, use a soft cloth soaked with a neutral detergent solution and warm water, then gently wipe down. Then, dry with a soft cloth.

To Disinfect the Main Body

To disinfect the main body, use a soft cloth soaked with an antiseptic solution. The antiseptic solution should be a water solution with the provided dilution ratio of one disinfectant, as shown in the below table. Then, use a different soft cloth, soaked with lukewarm water to gently wipe down the main body. Dry with soft cloth.

Ethanol: Dilution % is 76.9-81.4%
Isopropanol: Dilution % is 70%
Aqueous Solution of the Benzalkonium Chloride: Dilution % is 0.10%
Chlorhexidine Gluconate Solution: Dilution % is 0.5%
Sodium Hypochlorite: Dilution % is 0.05%
A surfactant (detergent for the kitchen) –

To Disinfect the Cuffs

To disinfect the cuff, use a soft cloth soaked with an antiseptic solution. The antiseptic solution should be a water solution with the provided dilution ratio of one disinfectant, as shown in the below table. Then, use a different soft cloth, soaked with lukewarm water to gently wipe down the main body. Dry with soft cloth.

Ethanol: Dilution % is 76.9-81.4%
Isopropanol: Dilution % is 70%
Aqueous Solution of the Chlorhexidine gluconate: Dilution % is 0.5%
Aqueous Solution of the Benzalkonium chloride: Dilution % is 0.1%

Note: If the cuff is damaged, worn or too dirty to clean, please replace the cuff cover.

  • Product Enquiry
  • Help & FAQ
    • Got a Question? Please complete this online form.

      For enquiries outside of Australia & New Zealand, please see the list of A&D Global contacts

      * Required field
    • Where can I purchase this equipment?

      A&D Australiasia has a nation wide dealer network with outlets in all capital cities and in most regional locations. Call Toll Free 1800 011 112 for the location of your nearest dealer.

      My product requires service/repair, how do I arrange this?

      Contact the A&D Australiasia Service department on (08) 8301 8100 or at [email protected] and they can advise on and coordinate your service requirement.